nach oben

Erschienen in:

2024 | OriginalPaper | Buchkapitel

1. Polymer Composites: Synthesis, Application, and Basic Theoretical Aspects

verfasst von : Nishtha Arora, Sachin Dua, Smruti Vardhan Purohit, Bibek Dash, Manishkumar D. Yadav, Bikash Kumar Jena, T. Senthilkumar

Erschienen in: Polymer Composites: From Computational to Experimental Aspects

Verlag: Springer Nature Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Polymers have been fundamental in advanced applications for an extended period due to their versatility and ease of molding to specific needs (Afzal and Nawab in Compos Solut Ballist 139–152, 2021) [1]. Nonetheless, using a single polymer often falls short of meeting the demands of advanced applications. Consequently, polymer composites have gained worldwide attention.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nächstes Kapitel Different Curing Methods Used for Polymer Composites

Afzal A, Nawab Y (2021) Polymer composites. In: Composite solutions for ballistics, 1st edn. Woodhead publishing series in composites science and engineering, pp 139–152. https://doi.org/10.1016/B978-0-12-821984-3.00003-6

Jose JP K, Malhotra SK, Thomas S et al (2012) Advances in polymer composites: macro-and micro composites–state of the art, new challenges, and opportunities. In: Part one introduction to polymer composites, 1st edn. Wiley-VCH, pp 1–16

Advani SG, Hsiao KT (2012) Introduction to composites and manufacturing processes. In: Manufacturing techniques for polymer matrix composites (PMCs): a volume in Woodhead Publishing series in composites science and engineering

Chohan JS, Boparai KS, Singh R, Hashmi MSJ (2022) Manufacturing techniques and applications of polymer matrix composites: a brief review. Adv Mater Process Technol 8:1–11. https://doi.org/10.1080/2374068X.2020.1835012CrossRef

Oladele IO, Omotosho TF, Adediran AA (2020) Polymer-based composites: an indispensable material for present and future applications. Int J Polym Sci 8834518. https://doi.org/10.1155/2020/8834518

Nagavally RR (2016) Composite materials-history, types, fabrication techniques, advantages, and applications. Int J Mech Prod Eng 5:82–87

Keya KN, Kona NA, Koly FA et al (2019) Natural fiber reinforced polymer composites: history, types, advantages, and applications. Mater Eng Res 1:69–87. https://doi.org/10.25082/MER.2019.02.006

Ghosh AK, Dwivedi M (2019) Processability of polymeric composites, 1st edn. Springer

Sivasubramanian P, Mayandi K, Arumugaprabu V et al (2021) History of composites and polymers. In: Polymer-based composites, pp 1–22. https://doi.org/10.1201/9781003126300-1

10.

https://www.snsinsider.com/reports/composite-packaging-market-1427

11.

Guo Y, Ruan K, Wang G, Gu J (2023) Advances and mechanisms in polymer composites toward thermal conduction and electromagnetic wave absorption. Sci Bullet 68:1195–1212. https://doi.org/10.1016/j.scib.2023.04.036

12.

Barari B, Pillai KM (2017) Green composites made from cellulose nanofibers and bio-based epoxy: processing, performance, and applications. In: Natural fiber-reinforced biodegradable and bioresorbable polymer composites. Woodhead publishing, pp 31–49. https://doi.org/10.1016/B978-0-08-100656-6.00003-0

13.

Patel VK, Kant R, Chauhan PS, Bhattacharya S (2022) Introduction to applications of polymers and polymer composites. In: Trends in applications of polymers and polymer composites. AIP Publishing, pp 1–6. https://doi.org/10.1063/9780735424555_001

14.

Wang RM, Zheng SR, Zheng YP (2011) Polymer matrix composites and technology, 1st edn. Woodhead publishing series in composites science and engineering

15.

Hamidi YK, Altan CM (2018) Process-induced defects in resin transfer molded composites. In: Comprehensive composite materials, vol 2, pp 95–106. https://doi.org/10.1016/B978-0-12-803581-8.09902-1

16.

Islam MS, Shahruzzaman M, Khan MN et al (2022) Composite materials: concept, recent advancements, and applications. In: Renewable polymers and polymer-metal oxide composites: synthesis, properties, and applications. Elsevier, pp 1–43. https://doi.org/10.1016/B978-0-323-85155-8.00011-X

17.

Freile-Pelegrín Y, Madera-Santana TJ (2017) Characterization techniques for algae-based materials. In: Algae based polymers, blends, and composites: chemistry, biotechnology and materials science, pp 649–670. https://doi.org/10.1016/B978-0-12-812360-7.00018-5

18.

Sivasubramanian P, Mayandi K, Arumugaprabu V et al (2021) History of composites and polymers. In: Polymer-based composites. CRC Press, pp 1–21. https://doi.org/10.1201/9781003126300-1

19.

Zhao X, Lu S, Li W et al (2022) Epoxy as filler or matrix for polymer composites. In: Epoxy-based composites. IntechOpen. https://doi.org/10.5772/intechopen.102448

20.

Varma IK, Gupta VB, Sini NK (2017) Thermosetting resin-properties. In: Comprehensive composite materials. Pergamon, London, pp 1–56. https://doi.org/10.1016/B0-08-042993-9/00177-7

21.

Campbell FC (2003) Commercial composite processes: these commercial processes produce far more parts than the high-performance processes. In: Manufacturing processes for advanced composites, 1st edn. Elsevier Science, pp 399–438. https://doi.org/10.1016/B978-185617415-2/50012-5

22.

Hodgkin J (2001) Thermosets: epoxies and polyesters. In: Encyclopedia of materials: science and technology, 2nd edn. Elsevier, pp 9215–9221. https://doi.org/10.1016/B0-08-043152-6/01660-0

23.

Mullins MJ, Liu D, Sue HJ (2018) Mechanical properties of thermosets. In: Thermosets: structure, properties, and applications, 2nd edn. Elsevier. https://doi.org/10.1016/C2015-0-06205-0

24.

Huang J, Fu S, Gan L (2019) Lignin-modified thermosetting materials. In: Lignin chemistry and applications, 1st edn. Elsevier, pp 163–180. https://doi.org/10.1016/B978-0-12-813941-7.00006-0

25.

Frollini E, Silva CG, Ramires EC (2013) Phenolic resins as a matrix material in advanced fiber-reinforced polymer (FRP) composites. In: Advanced fibre-reinforced polymer (FRP) composites for structural applications. Woodhead publishing series in civil and structural engineering, pp 7–43. https://doi.org/10.1533/9780857098641.1.7

26.

Hsissou R, Seghiri R, Benzekri Z et al (2021) Polymer composite materials: a comprehensive review. Compos Struct 262:113640. https://doi.org/10.1016/j.compstruct.2021.113640

27.

Mallick PK (2010) Thermoplastics and thermoplastic–matrix composites for lightweight automotive structures. In: Materials, design and manufacturing for lightweight vehicles, 2nd edn. Woodhead publishing series in composites science and engineering, pp 174–207. https://doi.org/10.1533/9781845697822.1.174

28.

Adeniyi A, Agboola O, Sadiku ER et al (2016) Thermoplastic-thermoset nanostructured polymer blends. In: Design and applications of nanostructured polymer blends and nanocomposite systems. William Andrew Publishing, pp 15–38. https://doi.org/10.1016/B978-0-323-39408-6.00002-9

29.

Reis JP, de Moura M, Samborski S (2020) Thermoplastic composites and their promising applications in joining and repair composites structures: a review. Materials 13:5832. https://doi.org/10.3390/ma13245832

30.

Gopanna A, Rajan KP, Thomas SP, Chavali M (2019) Polyethylene and polypropylene matrix composites for biomedical applications. In: Materials for biomedical engineering: thermoset and thermoplastic polymers. Elsevier, pp 175–216. https://doi.org/10.1016/B978-0-12-816874-5.00006-2

31.

Pleşa I, Noţingher PV, Stancu C et al (2019) Polyethylene nanocomposites for power cable insulations. Polym (Basel) 11:24. https://doi.org/10.3390/polym11010024

32.

Nomura M, Shanmuga Ramanan SM, Arun S (2017) Automobile bumpers. In: Comprehensive composite materials, 2nd edn. Elsevier, pp 460–468. https://doi.org/10.1016/B978-0-12-803581-8.03962-X

33.

Koncar V (2019) Composites and hybrid structures. In: Smart textiles for in situ monitoring of composites, 1st edn. Elsevier, pp 1–151. https://doi.org/10.1016/B978-0-08-102308-2.00001-2

34.

Rulkens R, Koning C (2012) 5.18-Chemistry and technology of polyamides. In: Polymer science: a comprehensive reference. Elsevier, pp 431–467. https://doi.org/10.1016/B978-0-444-53349-4.00147-3

35.

Baek YM, Shin PS, Kim JH et al (2020) Thermal transfer, interfacial, and mechanical properties of carbon fiber/polycarbonate-CNT composites using infrared thermography. Polym Test 81:106247. https://doi.org/10.1016/j.polymertesting.2019.106247

36.

McKeen LW (2010) Polyesters. In: Fatigue and tribological properties of plastics and elastomers, 2nd edn. William Andrew Publishing. https://doi.org/10.1016/C2009-0-20351-5

37.

Borges C, Chícharo A, Araújo A et al (2023) Designing of carbon fiber-reinforced polymer (CFRP) composites for a second-life in the aeronautic industry: strategies towards a more sustainable future. Front Mater 10. https://doi.org/10.3389/fmats.2023.1179270

38.

Talikoti RS, Kandekar SB (2019) Strength and durability study of concrete structures using aramid-fiber-reinforced polymer. Fibers 7:11. https://doi.org/10.3390/FIB7020011

39.

Dharmavarapu P, Sreekara SR (2022) Aramid fibre as potential reinforcement for polymer matrix composites: a review. Emergent Mater 5. https://doi.org/10.1007/s42247-021-00246-x

40.

Sathishkumar TP, Satheeshkumar S, Naveen J (2014) Glass fiber-reinforced polymer composites-a review. J Reinf Plast Compos 33:1258–1275. https://doi.org/10.1177/0731684414530790

41.

Sandor RB (1990) PBI (Polybenzimidazole): synthesis, properties and applications. High Perform Polym 2. https://doi.org/10.1177/152483999000200103

42.

Anidha S, Latha N, Muthukkumar M (2019) Reinforcement of Aramid fiber with bagasse epoxy bio-degradable composite: investigations on mechanical properties and surface morphology. J Mater Res Technol 8. https://doi.org/10.1016/j.jmrt.2019.05.008

43.

Kandekar SB, Talikoti RS (2018) Study of torsional behavior of reinforced concrete beams strengthened with aramid fiber strips. Int J Adv Struct Eng 10:465–474. https://doi.org/10.1007/s40091-018-0208-y

44.

Xu G, Jin Y, Song J (2022) Improvement of the mechanical properties by surface modification of ZnCl₂ and polydopamine in aramid fiber composites. Appl Sci (Switz) 12:3119. https://doi.org/10.3390/app12063119

45.

Kichloo AF, Raina A, Haq MIU, Wani MS (2022) Impact of carbon fiber reinforcement on mechanical and tribological behavior of 3D-printed polyethylene terephthalate glycol polymer composites—an experimental investigation. J Mater Eng Perform 31. https://doi.org/10.1007/s11665-021-06262-6

46.

Davidson JR, Quinn JA, Rothmann C et al (2022) Mechanical characterisation of pneumatically-spliced carbon fibre yarns as reinforcements for polymer composites. Mater Des 213. https://doi.org/10.1016/j.matdes.2021.110305

47.

Ahmad Fauzi AA, Osman AF, Alrashdi AA et al (2022) On the use of dolomite as a mineral filler and co-filler in the field of polymer composites: a review. Polym (Basel) 14:2843. https://doi.org/10.3390/polym14142843

48.

Ramesh M, Rajeshkumar LN, Srinivasan N et al (2022) Influence of filler material on properties of fiber-reinforced polymer composites: a review. E-Polymers 22:898–916. https://doi.org/10.1515/epoly-2022-0080

49.

DeArmitt C (2016) Functional fillers for plastics. In: Applied plastics engineering handbook: processing, materials, and applications, 2nd edn. Wiley-VCH

50.

Los P, Lukomska A, Jeziorska R (2016) Metal-polymer composites for electromagnetic interference shielding applications. Polim/Polym 61:663–669. https://doi.org/10.14314/polimery.2016.663

51.

Xu F, Yan C, Shyng YT et al (2014) Ultra-toughened nylon 12 nanocomposites reinforced with IF-WS2. Nanotechnology 25:325701. https://doi.org/10.1088/0957-4484/25/32/325701

52.

Sabirneeza AAF, Subhashini S, Rajalakshmi R (2013) Water soluble conducting polymer composite of polyvinyl alcohol and leucine: an effective acid corrosion inhibitor for mild steel. Mater Corros 64:74–82. https://doi.org/10.1002/maco.201106096

53.

Sahu M, Narashimhan L, Prakash O, Raichur AM (2017) Noncovalently functionalized tungsten disulfide nanosheets for enhanced mechanical and thermal properties of epoxy nanocomposites. ACS Appl Mater Interfaces 9:14347–14357. https://doi.org/10.1021/acsami.7b01608

54.

Badawi A (2021) Enhancement of the optical properties of PVP using Zn1-xSnxS for UV-region optical applications. Appl Phys A Mater Sci Process 127. https://doi.org/10.1007/s00339-020-04157-2

55.

Ren J, Li Q, Yan L et al (2020) Enhanced thermal conductivity of epoxy composites by introducing graphene@boron nitride nanosheets hybrid nanoparticles. Mater Des 191:108663. https://doi.org/10.1016/j.matdes.2020.108663

56.

Luo S, Yu J, Yu S et al (2019) Significantly enhanced electrostatic energy storage performance of flexible polymer composites by introducing highly insulating-ferroelectric microhybrids as fillers. Adv Energy Mater 9:1803204. https://doi.org/10.1002/aenm.201803204

57.

Zhao YH, Zhang YF, Wu ZK, Bai SL (2016) Synergic enhancement of thermal properties of polymer composites by graphene foam and carbon black. Compos B Eng 84:52–58. https://doi.org/10.1016/j.compositesb.2015.08.074

58.

Zhang Z, Du Y, Zhu C et al (2021) Unprecedented enhancement of wear resistance for epoxy-resin graphene composites. Nanoscale 13:2855–2867. https://doi.org/10.1039/d0nr08600b

59.

Jia YW, Zhao X, Fu T et al (2020) Synergy effect between quaternary phosphonium ionic liquid and ammonium polyphosphate toward flame retardant PLA with improved toughness. Compos B Eng 197:108192. https://doi.org/10.1016/j.compositesb.2020.108192

60.

Adak B, Joshi M, Butola BS (2019) Polyurethane/functionalized-graphene nanocomposite films with enhanced weather resistance and gas barrier properties. Compos B Eng 176. https://doi.org/10.1016/j.compositesb.2019.107303

61.

Fawaz J, Mittal V (2015) Synthesis of polymer nanocomposites: review of various techniques In: Synthesis techniques for polymer nanocomposites, 1st edn. Wiley-VCH. https://doi.org/10.1002/9783527670307.ch1

62.

Bhagyaraj S, Oluwafemi OS, Kalarikkal N, Thomas S (2018) Synthesis of inorganic nanomaterials: advances and key technologies, 1st edn. Elsevier

63.

Verma D, Goh KL (2019) Functionalized graphene-based nanocomposites for energy applications. In: Functionalized graphene nanocomposites and their derivatives: synthesis, processing and applications. https://doi.org/10.1016/B978-0-12-814548-7.00011-8

64.

Maiti S, Suin S, Shrivastava NK, Khatua BB (2014) Low percolation threshold and high electrical conductivity in melt-blended polycarbonate/multiwall carbon nanotube nanocomposites in the presence of poly(ε-caprolactone). Polym Eng Sci 54. https://doi.org/10.1002/pen.23600

65.

Lee SK, Seong DG, Youn JR (2005) Degradation and rheological properties of biodegradable nanocomposites prepared by melt intercalation method. Fibers Polym 6. https://doi.org/10.1007/BF02875664

66.

Kumar DS (2016) Synthesis and characterization of polymer nanocomposites for biomedical applications-current perspectives and challenges. IJRES 4:1–6

67.

Mtibe A, Mokhothu TH, John MJ et al (2018) Fabrication and characterization of various engineered nanomaterials. In: Handbook of nanomaterials for industrial applications. Elsevier, pp 151–171. https://doi.org/10.1016/B978-0-12-813351-4.00009-2

68.

Tang LC, Zhao L, Qiang F et al (2019) Mechanical properties of rubber nanocomposites containing carbon nanofillers. In: Carbon-based nanofillers and their rubber nanocomposites: fundamentals and applications. https://doi.org/10.1016/B978-0-12-817342-8.00012-3

69.

Akpan EI, Shen X, Wetzel B, Friedrich K (2018) Design and synthesis of polymer nanocomposites. In: Polymer composites with functionalized nanoparticles: synthesis, properties, and applications, 1st edn. Elsevier, pp 47–75. https://doi.org/10.1016/B978-0-12-814064-2.00002-0

70.

Vasudeo Rane A, Kanny K, Abitha VK et al (2017) Clay-polymer composites: design of clay polymer nanocomposite by mixing. In: Clay-polymer nanocomposites, 1st edn. Elsevier, pp 113–142. https://doi.org/10.1016/B978-0-323-46153-5.00004-5

71.

Dantas de Oliveira A, Augusto Gonçalves Beatrice C (2019) Polymer nanocomposites with different types of nanofiller. In: Nanocomposites-recent evolutions, 1st edn. IntechOpen. https://doi.org/10.5772/intechopen.81329

72.

Paszkiewicz S, Szymczyk A (2019) Graphene-based nanomaterials and their polymer nanocomposites. In: Nanomaterials and polymer nanocomposites: raw materials to applications. Elsevier, pp 177–216. https://doi.org/10.1016/B978-0-12-814615-6.00006-0

73.

Grothe J, Kaskel S, Leuteritz A (2012) Nanocomposites and hybrid materials. In: Polymer science: a comprehensive reference, vol 10, pp 177–209. https://doi.org/10.1016/B978-0-444-53349-4.00206-5

74.

Avella M, Errico ME, Martuscelli E (2001) Novel PMMA/CaCO₃ nanocomposites abrasion resistant prepared by an in situ polymerization process. Nano Lett 1:213–217. https://doi.org/10.1021/nl015518v

75.

Allen R, Pan L, Fuller GG, Bao Z (2014) Using in-situ polymerization of conductive polymers to enhance the electrical properties of solution-processed carbon nanotube films and fibers. ACS Appl Mater Interfaces 6:9966–9974. https://doi.org/10.1021/am5019995

76.

Khan W, Sharma R, Saini P (2016) Carbon nanotube-based polymer composites: synthesis, properties and applications. In: Carbon nanotubes-current progress of their polymer composites. InTech. https://doi.org/10.5772/62497

77.

Friedrich K (2018) Polymer composites for tribological applications. Adv Ind Eng Polym Res 1:3–39. https://doi.org/10.1016/j.aiepr.2018.05.001

78.

Shields RJ, Bhattacharyya D, Fakirov S (2008) Fibrillar polymer-polymer composites: morphology, properties and applications. J Mater Sci 43:6758–6770. https://doi.org/10.1007/s10853-008-2693-z

79.

Sajan S, Philip Selvaraj D (2021) A review on polymer matrix composite materials and their applications. Mater Today: Proc 47:5493–5498. https://doi.org/10.1016/j.matpr.2021.08.034

80.

Alhazmi H, Shah SAR, Anwar MK et al (2021) Utilization of polymer concrete composites for a circular economy: a comparative review for assessment of recycling and waste utilization. Polym (Basel) 13:2135. https://doi.org/10.3390/polym13132135

81.

Tomar P, Lakhani R, Chhibber VK, Kumar R (2018) Macro-defect free cements: a future oriented polymer composite materials for construction industries. Compos Interfaces 25:1–21. https://doi.org/10.1080/09276440.2018.1439637

82.

Zaman A, Gutub SA, Wafa MA (2013) A review on FRP composites applications and durability concerns in the construction sector. J Reinf Plast Compos 32:1966–1988. https://doi.org/10.1177/0731684413492868CrossRef

83.

Lewis JA, Boyer MA (1995) Effects of an organotitanate cross-linking additive on the processing and properties of macro-defect-free cement. Adv Cem Based Mater 2:2–7. https://doi.org/10.1016/1065-7355(95)90033-0CrossRef

84.

Qiao Y (2005) On the fracture toughness of calcium aluminate cement-phenol resin composites. Cem Concr Res 35:220–225. https://doi.org/10.1016/j.cemconres.2004.05.039

85.

Humphreys MF (2003) The use of polymer composites in construction. In: International conference on smart and sustainable built environment, pp 1–9

86.

Wan B (2014) Using fiber-reinforced polymer (FRP) composites in bridge construction and monitoring their performance: an overview. In: Advanced composites in bridge construction and repair. Woodhead Publishing, pp 3–29. https://doi.org/10.1533/9780857097019.1.3

87.

Hollaway LC, Head PR (2001) Advanced polymer composites and polymers in the civil infrastructure, Ist edn. Elsevier. https://doi.org/10.1016/B978-0-08-043661-6.X5000-1

88.

Siwowski T, Kaleta D, Rajchel M (2018) Structural behaviour of an all-composite road bridge. Compos Struct 192:555–567. https://doi.org/10.1016/j.compstruct.2018.03.042

89.

Kossakowski PG, Wciślik W (2022) Fiber-reinforced polymer composites in the construction of bridges: opportunities, problems and challenges. Fibers 10:37. https://doi.org/10.3390/fib10040037

90.

Holbery J, Houston D (2006) Natural-fiber-reinforced polymer composites in automotive applications. JOM 58:80–86. https://doi.org/10.1007/s11837-006-0234-2

91.

Muhammad A, Rahman MR, Baini R, Bin Bakri MK (2020) Applications of sustainable polymer composites in automobile and aerospace industry. In: Advances in sustainable polymer composites, Ist edn. Woodhead publishing series in composites science and engineering, pp 185–207. https://doi.org/10.1016/B978-0-12-820338-5.00008-4

92.

Veličković S, Stojanović B, Ivanović L et al (2019) Application of nanocomposites in the automotive industry. Mobil Veh Mech 45:323–332. https://doi.org/10.24874/mvm.2019.45.03.05

93.

Mohammadi H, Ahmad Z, Mazlan SA et al (2023) Lightweight glass fiber-reinforced polymer composite for automotive bumper applications: a review. Polym (Basel) 15:193. https://doi.org/10.3390/polym15010193

94.

Ma R, Tao Y, Chen Y et al (2021) Achieving 16.68% efficiency ternary as-cast organic solar cells. Sci China Chem 64:581–589. https://doi.org/10.1007/s11426-020-9912-0

95.

Song R, Wu Y, Lin C et al (2022) High-speed shift register with dual-gated thin-film transistors for a 31-Inch 4K AMOLED display. Micromachines (Basel) 13:1696. https://doi.org/10.3390/mi13101696

96.

Cao X, Xiong Y, Sun J et al (2021) Piezoelectric nanogenerators derived self-powered sensors for multifunctional applications and artificial intelligence. Adv Funct Mater 31:2102983. https://doi.org/10.1002/adfm.202102983

97.

Sim K, Rao Z, Kim HJ et al (2019) Fully rubbery integrated electronics from high effective mobility intrinsically stretchable semiconductors. Sci Adv 5:1–10. https://doi.org/10.1126/sciadv.aav5749

98.

De Rossi F, Renno G, Taheri B et al (2021) Modified P3HT materials as hole transport layers for flexible perovskite solar cells. J Power Sources 494:229735. https://doi.org/10.1016/j.jpowsour.2021.229735

99.

Lee H, Kim Y, Kim J et al (2022) Consecutive ink writing of conducting polymer and graphene composite electrodes for foldable electronics-related applications. Polym (Basel) 14:5294. https://doi.org/10.3390/polym14235294

100.

Liu H, Li Q, Zhang S et al (2018) Electrically conductive polymer composites for smart flexible strain sensors: a critical review. J Mater Chem C Mater 6:12121–12141. https://doi.org/10.1039/C8TC04079F

101.

Kong W, Yang Y, Wang Y et al (2022) An ultra-low hysteresis, self-healing and stretchable conductor based on dynamic disulfide covalent adaptable networks. J Mater Chem A Mater 10:2012–2020. https://doi.org/10.1039/d1ta08737a

102.

Shown I, Ganguly A, Chen LC, Chen KH (2015) Conducting polymer-based flexible supercapacitor. Energy Sci Eng 3:2–26. https://doi.org/10.1002/ese3.50

103.

Kumar P, Narayan Maiti U, Sikdar A et al (2019) Recent advances in polymer and polymer composites for electromagnetic interference shielding: review and future prospects. Polym Rev 59:1–52. https://doi.org/10.1080/15583724.2019.1625058

104.

Rubino F, Nisticò A, Tucci F, Carlone P (2020) Marine application of fiber reinforced composites: a review. J Mar Sci Eng 8:26. https://doi.org/10.3390/jmse8010026

105.

Selvaraju S, Ilaiyavel S (2011) Applications of composites in marine industry. J Eng Res Stud 2:89–91

106.

Okuma SO, Obaseki M, Okiemute Ofuyekpone D, Endurance Ashibudike O (2023) A review assessment of fiber-reinforced polymers for maritime applications. J Adv Ind Technol Appl 4:17–28. https://doi.org/10.30880/jaita.2023.04.01.003

107.

Mouritz AP, Gellert E, Burchill P, Challis K (2001) Review of advanced composite structures for naval ships and submarines. Compos Struct 53:21–42. https://doi.org/10.1016/S0263-8223(00)00175-6

108.

Rajak DK, Pagar DD, Menezes PL, Linul E (2019) Fiber-reinforced polymer composites: manufacturing, properties, and applications. Polym (Basel) 11:1667. https://doi.org/10.3390/polym11101667

109.

Kumar A, Lal Krishna G, Anantha Subramanian V (2019) Design and analysis of a carbon composite propeller for podded propulsion. In: Lecture notes in civil engineering, vol 22. Springer, pp 203–215. https://doi.org/10.1007/978-981-13-3119-0_13

110.

Kesarwani S (2017) Polymer composites in aviation sector a brief review article. IJERT 6:518–525. https://doi.org/10.17577/IJERTV6IS060291

111.

Muhammad A, Rahman MR, Baini R, Bin Bakri MK (2020) Applications of sustainable polymer composites in automobile and aerospace industry. In: Advances in sustainable polymer composites, 1st edn. Woodhead publishing series in composites science and engineering, pp 185–207. https://doi.org/10.1016/B978-0-12-820338-5.00008-4

112.

Fahrenholtz WG, Hilmas GE, Talmy IG, Zaykoski JA (2007) Refractory diborides of zirconium and hafnium. J Am Ceram Soc 90:1347–1364. https://doi.org/10.1111/j.1551-2916.2007.01583.x

113.

Parveez B, Kittur MI, Badruddin IA et al (2022) Scientific advancements in composite materials for aircraft applications: a review. Polym (Basel) 14:5007. https://doi.org/10.3390/polym14225007

114.

Hench LL (1998) Biomaterials: a forecast for the future. Biomaterials 19:1419–1423. https://doi.org/10.1016/s0142-9612(98)00133-1

115.

Langer R, Tirrell DA (2004) Designing materials for biology and medicine. Nature 428:487-492. https://doi.org/10.1038/nature02388

116.

Bose S, Ke D, Sahasrabudhe H, Bandyopadhyay A (2018) Additive manufacturing of biomaterials. Prog Mater Sci 93:45–111. https://doi.org/10.1016/j.pmatsci.2017.08.003

117.

Guo Z, Poot AA, Grijpma DW (2021) Advanced polymer-based composites and structures for biomedical applications. Eur Polym J 149:110388. https://doi.org/10.1016/j.eurpolymj.2021.110388

118.

Hussein EA, Zagho MM, Nasrallah GK, Elzatahry AA (2018) Recent advances in functional nanostructures as cancer photothermal therapy. Int J Nanomedicine 13:2897–2906. https://doi.org/10.2147/IJN.S161031

119.

Al-Enizi AM, Zagho MM, Elzatahry AA (2018) Polymer-based electrospun nanofibers for biomedical applications. Nanomaterials 8:259. https://doi.org/10.3390/nano8040259

120.

Salernitano E, Migliaresi C (2003) Composite materials for biomedical applications: a review. J Appl Biomater Biomech 1:3–18. https://doi.org/10.1177/228080000300100102

121.

Ibrahim ID, Jamiru T, Sadiku ER, Hamam Y (2019) Development and utilization of polymers in biomedical applications. In: 2019 open innovations conference (OI), pp 165–170. https://doi.org/10.1109/OI.2019.8908248

122.

Abbas M, Alqahtani MS, Alhifzi R (2023) Recent developments in polymer nanocomposites for bone regeneration. Int J Mol Sci 24:3312. https://doi.org/10.3390/ijms24043312

123.

Ramakrishna S, Mayer J, Wintermantel E, Leong KW (2001) Biomedical applications of polymer-composite materials: a review. Compos Sci Technol 61:1189–1224. https://doi.org/10.1016/S0266-3538(00)00241-4

124.

Thang NH, Chien TB, Cuong DX (2023) Polymer-based hydrogels applied in drug delivery: an overview. Gels 9:523. https://doi.org/10.3390/gels9070523

125.

Gartner TE, Jayaraman A (2019) Modeling and simulations of polymers: a roadmap. Macromolecules 52:755–786. https://doi.org/10.1021/acs.macromol.8b01836CrossRef

126.

Ndoro TVM, Voyiatzis E, Ghanbari A, Theodorou DN, Böhm MC, Müller-Plathe F (2011) Interface of grafted and ungrafted silica nanoparticles with a polystyrene matrix: atomistic molecular dynamics simulations. Macromolecules 44:2316–2327. https://doi.org/10.1021/ma102833uCrossRef

127.

Pandey YN, Doxastakis M (2012) Detailed atomistic Monte Carlo simulations of a polymer melt on a solid surface and around a nanoparticle. J Chem Phys 136. https://doi.org/10.1063/1.3689316

128.

Ndoro TVM, Böhm MC, Müller-Plathe F (2012) Interface and interphase dynamics of polystyrene chains near grafted and ungrafted silica nanoparticles. Macromolecules 45:171–179. https://doi.org/10.1021/ma2020613CrossRef

129.

Lane JMD, Ismail AE, Chandross M, Lorenz CD, Grest GS (2009) Forces between functionalized silica nanoparticles in solution. Phys Rev E 79:050501. https://doi.org/10.1103/PhysRevE.79.050501CrossRef

130.

Kyrychenko A, Pasko DA, Kalugin ON (2017) Poly(vinyl alcohol) as a water protecting agent for silver nanoparticles: the role of polymer size and structure. Phys Chem Chem Phys 19:8742–8756. https://doi.org/10.1039/C6CP05562ACrossRefPubMed

131.

Kyrychenko A, Korsun OM, Gubin II, Kovalenko SM, Kalugin ON (2015) Atomistic simulations of coating of silver nanoparticles with poly(vinylpyrrolidone) oligomers: effect of oligomer chain length. J Phys Chem C 119:7888–7899. https://doi.org/10.1021/jp510369aCrossRef

132.

Ganesan V, Jayaraman A (2014) Theory and simulation studies of effective interactions, phase behavior and morphology in polymer nanocomposites. Soft Matter 10:13–38. https://doi.org/10.1039/C3SM51864GCrossRefPubMed

133.

Eslami H, Rahimi M, Müller-Plathe F (2013) Molecular dynamics simulation of a silica nanoparticle in oligomeric poly(methyl methacrylate): a model system for studying the interphase thickness in a polymer-nanocomposite via different properties. Macromolecules 46:8680–8692. https://doi.org/10.1021/ma401443vCrossRef

134.

Brown D, Mélé P, Marceau S, Albérola ND (2003) A molecular dynamics study of a model nanoparticle embedded in a polymer matrix. Macromolecules 36:1395–1406. https://doi.org/10.1021/ma020951sCrossRef

135.

Karatrantos A, Clarke N, Kröger M (2016) Modeling of polymer structure and conformations in polymer nanocomposites from atomistic to mesoscale: a review. Polym Rev 56:385–428. https://doi.org/10.1080/15583724.2015.1090450CrossRef

136.

Vogiatzis GG, Theodorou DN (2014) Local segmental dynamics and stresses in polystyrene–C 60 mixtures. Macromolecules 47:387–404. https://doi.org/10.1021/ma402214rCrossRef

137.

Smith JS, Borodin O, Smith GD, Kober EM (2007) A molecular dynamics simulation and quantum chemistry study of poly(dimethylsiloxane)–silica nanoparticle interactions. J Polym Sci Part B Polym Phys 45:1599–1615. https://doi.org/10.1002/polb.21119CrossRef

138.

Peters BL, Lane JMD, Ismail AE, Grest GS (2012) Fully atomistic simulations of the response of silica nanoparticle coatings to alkane solvents. Langmuir 28:17443–17449. https://doi.org/10.1021/la3023166CrossRefPubMed

139.

Pavlov AS, Khalatur PG (2016) Filler reinforcement in cross-linked elastomer nanocomposites: insights from fully atomistic molecular dynamics simulation. Soft Matter 12:5402–5419. https://doi.org/10.1039/C6SM00543HCrossRefPubMed

140.

Pandey YN, Papakonstantopoulos GJ, Doxastakis M (2013) Polymer/nanoparticle interactions: bridging the gap. Macromolecules 46:5097–5106. https://doi.org/10.1021/ma400444wCrossRef

141.

Kukol A (2009) Lipid models for united-atom molecular dynamics simulations of proteins. J Chem Theory Comput 5:615–626. https://doi.org/10.1021/ct8003468CrossRefPubMed

142.

Stubbs JM, Potoff JJ, Siepmann JI (2004) Transferable potentials for phase equilibria. 6. United-atom description for ethers, glycols, ketones, and aldehydes. J Phys Chem B 108:17596–17605. https://doi.org/10.1021/jp049459w

143.

Chen B, Potoff JJ, Siepmann JI (2001) Monte Carlo calculations for alcohols and their mixtures with alkanes. Transferable potentials for phase equilibria. 5. United-atom description of primary, secondary, and tertiary alcohols. J Phys Chem B 105:3093–3104. https://doi.org/10.1021/jp003882x

144.

Tieleman DP, MacCallum JL, Ash WL, Kandt C, Xu Z, Monticelli L (2006) Membrane protein simulations with a united-atom lipid and all-atom protein model: lipid–protein interactions, side chain transfer free energies and model proteins. J Phys Condens Matter 18:S1221–S1234. https://doi.org/10.1088/0953-8984/18/28/S07CrossRefPubMed

145.

Yang L, Tan C, Hsieh M-J, Wang J, Duan Y, Cieplak P, Caldwell J, Kollman PA, Luo R (2006) New-generation amber united-atom force field. J Phys Chem B 110:13166–13176. https://doi.org/10.1021/jp060163vCrossRefPubMed

146.

Wick CD, Martin MG, Siepmann JI (2000) Transferable potentials for phase equilibria. 4. United-atom description of linear and branched alkenes and alkylbenzenes. J Phys Chem B 104:8008–8016. https://doi.org/10.1021/jp001044x

147.

Martin MG, Siepmann JI (1999) Novel configurational-bias Monte Carlo method for branched molecules. Transferable potentials for phase equilibria. 2. United-atom description of branched alkanes. J Phys Chem B 103:4508–4517. https://doi.org/10.1021/jp984742e

148.

González MA (2011) Force fields and molecular dynamics simulations. École Thématique La Société Française La Neutron 12:169–200. https://doi.org/10.1051/sfn/201112009CrossRef

149.

Lindorff-Larsen K, Piana S, Palmo K, Maragakis P, Klepeis JL, Dror RO, Shaw DE (2010) Improved side-chain torsion potentials for the Amber ff99SB protein force field. Proteins Struct Funct Bioinform 78:1950–1958. https://doi.org/10.1002/prot.22711CrossRef

150.

Lopes PEM, Guvench O, MacKerell AD (2015) Current status of protein force fields for molecular dynamics simulations, pp 47–71. https://doi.org/10.1007/978-1-4939-1465-4_3

151.

Mackerell AD (2004) Empirical force fields for biological macromolecules: overview and issues. J Comput Chem 25:1584–1604. https://doi.org/10.1002/jcc.20082CrossRefPubMed

152.

Hornak V, Abel R, Okur A, Strockbine B, Roitberg A, Simmerling C (2006) Comparison of multiple Amber force fields and development of improved protein backbone parameters. Proteins Struct Funct Bioinform 65:712–725. https://doi.org/10.1002/prot.21123CrossRef

153.

Pérez A, Marchán I, Svozil D, Sponer J, Cheatham TE, Laughton CA, Orozco M (2007) Refinement of the AMBER force field for nucleic acids: improving the description of α/γ conformers. Biophys J 92:3817–3829. https://doi.org/10.1529/biophysj.106.097782CrossRefPubMedPubMedCentral

154.

MacKerell AD, Bashford D, Bellott M, Dunbrack RL, Evanseck JD, Field MJ, Fischer S, Gao J, Guo H, Ha S, Joseph-McCarthy D, Kuchnir L, Kuczera K, Lau FTK, Mattos C, Michnick S, Ngo T, Nguyen DT, Prodhom B, Reiher WE, Roux B, Schlenkrich M, Smith JC, Stote R, Straub J, Watanabe M, Wiórkiewicz-Kuczera J, Yin D, Karplus M (1998) All-atom empirical potential for molecular modeling and dynamics studies of proteins. J Phys Chem B 102:3586–3616. https://doi.org/10.1021/jp973084fCrossRefPubMed

155.

Vanommeslaeghe K, Hatcher E, Acharya C, Kundu S, Zhong S, Shim J, Darian E, Guvench O, Lopes P, Vorobyov I, Mackerell AD (2010) CHARMM general force field: a force field for drug-like molecules compatible with the CHARMM all-atom additive biological force fields. J Comput Chem 31:671–690. https://doi.org/10.1002/jcc.21367CrossRefPubMedPubMedCentral

156.

Klauda JB, Venable RM, Freites JA, O’Connor JW, Tobias DJ, Mondragon-Ramirez C, Vorobyov I, MacKerell AD, Pastor RW (2010) Update of the CHARMM all-atom additive force field for lipids: validation on six lipid types. J Phys Chem B 114:7830–7843. https://doi.org/10.1021/jp101759qCrossRefPubMedPubMedCentral

157.

Karasawa N, Dasgupta S, Goddard WA (1991) Mechanical properties and force field parameters for polyethylene crystal. J Phys Chem 95:2260–2272. https://doi.org/10.1021/j100159a031CrossRef

158.

Lacks DJ, Rutledge GC (1994) Simulation of the temperature dependence of mechanical properties of polyethylene. J Phys Chem 98:1222–1231. https://doi.org/10.1021/j100055a030CrossRef

159.

Marcon V, Raos G (2004) Molecular modeling of crystalline oligothiophenes: testing and development of improved force fields. J Phys Chem B 108:18053–18064. https://doi.org/10.1021/jp047128dCrossRef

160.

DuBay KH, Hall ML, Hughes TF, Wu C, Reichman DR, Friesner RA (2012) Accurate force field development for modeling conjugated polymers. J Chem Theory Comput 8:4556–4569. https://doi.org/10.1021/ct300175wCrossRefPubMed

161.

Halgren TA (1999) MMFF VII. Characterization of MMFF94, MMFF94s, and other widely available force fields for conformational energies and for intermolecular-interaction energies and geometries. J Comput Chem 20:730–748. https://doi.org/10.1002/(SICI)1096-987X(199905)20:7<730::AID-JCC8>3.0.CO;2-T

162.

Mark P, Nilsson L (2001) Structure and dynamics of the TIP3P, SPC, and SPC/E water models at 298 K. J Phys Chem A 105:9954–9960. https://doi.org/10.1021/jp003020wCrossRef

163.

Jorgensen WL, Chandrasekhar J, Madura JD, Impey RW, Klein ML (1983) Comparison of simple potential functions for simulating liquid water. J Chem Phys 79:926–935. https://doi.org/10.1063/1.445869CrossRef

164.

Mu Y, Kosov DS, Stock G (2003) Conformational dynamics of trialanine in water. 2. Comparison of AMBER, CHARMM, GROMOS, and OPLS force fields to NMR and infrared experiments. J Phys Chem B 107:5064–5073. https://doi.org/10.1021/jp022445a

165.

Underwood TR, Greenwell HC (2018) The water-alkane interface at various NaCl salt concentrations: a molecular dynamics study of the readily available force fields. Sci Rep 8:352. https://doi.org/10.1038/s41598-017-18633-yCrossRefPubMedPubMedCentral

166.

Mayo SL, Olafson BD, Goddard WA (1990) DREIDING: a generic force field for molecular simulations. J Phys Chem 94:8897–8909. https://doi.org/10.1021/j100389a010CrossRef

167.

Müller-Plathe F (2002) Coarse-graining in polymer simulation: from the atomistic to the mesoscopic scale and back. ChemPhysChem 3:754–769. https://doi.org/10.1002/1439-7641(20020916)3:9%3c754::AID-CPHC754%3e3.0.CO;2-UCrossRef

168.

Nielsen SO, Lopez CF, Srinivas G, Klein ML (2004) Coarse grain models and the computer simulation of soft materials. J Phys Condens Matter 16:R481–R512. https://doi.org/10.1088/0953-8984/16/15/R03CrossRef

169.

Theodorou DN (n.d.) Equilibration and coarse-graining methods for polymers. In: Computer simulations in condensed matter systems: from materials to chemical biology volume 2, pp. 419–448. Springer, Berlin. https://doi.org/10.1007/3-540-35284-8_16

170.

Marrink SJ, de Vries AH, Mark AE (2004) Coarse grained model for semiquantitative lipid simulations. J Phys Chem B 108:750–760. https://doi.org/10.1021/jp036508gCrossRef

171.

Brini E, Algaer EA, Ganguly P, Li C, Rodríguez-Ropero F, van der Vegt NFA (2013) Systematic coarse-graining methods for soft matter simulations–a review. Soft Matter 9:2108–2119. https://doi.org/10.1039/C2SM27201FCrossRef

172.

Hsu H-P, Grassberger P (2011) A review of Monte Carlo simulations of polymers with PERM. J Stat Phys 144:597–637. https://doi.org/10.1007/s10955-011-0268-xCrossRef

173.

Panagiotopoulos AZ (2000) Monte Carlo methods for phase equilibria of fluids. J Phys Condens Matter 12:R25–R52. https://doi.org/10.1088/0953-8984/12/3/201CrossRef

174.

Fried H, Binder K (1991) The microphase separation transition in symmetric diblock copolymer melts: a Monte Carlo study. J Chem Phys 94:8349–8366. https://doi.org/10.1063/1.460067CrossRef

175.

Binder K, Müller M (2000) Monte Carlo simulation of block copolymers. Curr Opin Colloid Interface Sci 5:314–322. https://doi.org/10.1016/S1359-0294(00)00074-1CrossRef

176.

Panagiotopoulos AZ (1992) Direct determination of fluid phase equilibria by simulation in the Gibbs ensemble: a review. Mol Simul 9:1–23. https://doi.org/10.1080/08927029208048258CrossRef

177.

Panagiotopoulos AZ (1987) Direct determination of phase coexistence properties of fluids by Monte Carlo simulation in a new ensemble. Mol Phys 61:813–826. https://doi.org/10.1080/00268978700101491CrossRef

178.

Panagiotopoulos AZ (1995) Gibbs ensemble techniques. In: Observation, prediction and simulation of phase transitions in complex fluids, pp 463–501. Springer Netherlands, Dordrecht. https://doi.org/10.1007/978-94-011-0065-6_11

179.

Panagiotopoulos AZ, Quirke N, Stapleton M, Tildesley DJ (1988) Phase equilibria by simulation in the Gibbs ensemble. Mol Phys 63:527–545. https://doi.org/10.1080/00268978800100361CrossRef

180.

Escobedo FA, de Pablo JJ (1996) Expanded grand canonical and Gibbs ensemble Monte Carlo simulation of polymers. J Chem Phys 105:4391–4394. https://doi.org/10.1063/1.472257CrossRef

181.

de Pablo JJ, Yan Q, Escobedo FA (1999) Simulation of phase transitions in fluids. Annu Rev Phys Chem 50:377–411. https://doi.org/10.1146/annurev.physchem.50.1.377CrossRefPubMed

182.

Statistical Physics (1980) Elsevier. https://doi.org/10.1016/C2009-0-24487-4

183.

Nedelcu S, Werner M, Lang M, Sommer J-U (2012) GPU implementations of the bond fluctuation model. J Comput Phys 231:2811–2824. https://doi.org/10.1016/j.jcp.2011.12.021CrossRef

184.

Rohrdanz MA, Zheng W, Clementi C (2013) Discovering mountain passes via torchlight: methods for the definition of reaction coordinates and pathways in complex macromolecular reactions. Annu Rev Phys Chem 64:295–316. https://doi.org/10.1146/annurev-physchem-040412-110006CrossRefPubMed

185.

Weinan E, Ren W, Vanden-Eijnden E (2002) String method for the study of rare events. Phys Rev B 66:052301. https://doi.org/10.1103/PhysRevB.66.052301

186.

Weinan E, Ren W, Vanden-Eijnden E (2005) Finite temperature string method for the study of rare events. J Phys Chem B 109:6688–6693. https://doi.org/10.1021/jp0455430

187.

Vanden-Eijnden E, Venturoli M (2009) Revisiting the finite temperature string method for the calculation of reaction tubes and free energies. J Chem Phys 130. https://doi.org/10.1063/1.3130083

188.

Ting CL, Wang Z-G (2012) Minimum free energy paths for a nanoparticle crossing the lipid membrane. Soft Matter 8:12066. https://doi.org/10.1039/c2sm26377gCrossRef

189.

Lyubimov I, Beltran-Villegas DJ, Jayaraman A (2017) PRISM theory study of amphiphilic block copolymer solutions with varying copolymer sequence and composition. Macromolecules 50:7419–7431. https://doi.org/10.1021/acs.macromol.7b01419CrossRef

190.

Beltran-Villegas DJ, Lyubimov I, Jayaraman A (2018) Molecular dynamics simulations and PRISM theory study of solutions of nanoparticles and triblock copolymers with solvophobic end blocks. Mol Syst Des Eng 3:453–472. https://doi.org/10.1039/C7ME00128BCrossRef

191.

Beltran-Villegas DJ, Jayaraman A (2018) Assembly of amphiphilic block copolymers and nanoparticles in solution: coarse-grained molecular simulation study. J Chem Eng Data 63:2351–2367. https://doi.org/10.1021/acs.jced.7b00925CrossRef

192.

Grossfield A, Zuckerman DM (2009) Quantifying uncertainty and sampling quality in biomolecular simulations, pp 23–48. https://doi.org/10.1016/S1574-1400(09)00502-7. (Chapter 2)

193.

Understanding Molecular Simulation (2002) Elsevier. https://doi.org/10.1016/B978-0-12-267351-1.X5000-7

194.

Melenkevitz J, Muthukumar M (1991) Density functional theory of lamellar ordering in diblock copolymers. Macromolecules 24:4199–4205. https://doi.org/10.1021/ma00014a038CrossRef

195.

Wu J, Li Z (2007) Density-functional theory for complex fluids. Annu Rev Phys Chem 58:85–112. https://doi.org/10.1146/annurev.physchem.58.032806.104650CrossRefPubMed

196.

McMullen WE, Freed KF (1990) A density functional theory of polymer phase transitions and interfaces. J Chem Phys 92:1413–1426. https://doi.org/10.1063/1.458153CrossRef

197.

Woodward CE, Yethiraj A (1994) Density functional theory for inhomogeneous polymer solutions. J Chem Phys 100:3181–3186. https://doi.org/10.1063/1.466409CrossRef

198.

Nakamura I, Wang Z-G (2012) Salt-doped block copolymers: ion distribution, domain spacing and effective χ parameter. Soft Matter 8:9356. https://doi.org/10.1039/c2sm25606aCrossRef

199.

Martin JI, Wang Z-G (1995) Polymer brushes: scaling, compression forces, interbrush penetration, and solvent size effects. J Phys Chem 99:2833–2844. https://doi.org/10.1021/j100009a045CrossRef

200.

Schmid F (1998) Self-consistent-field theories for complex fluids. J Phys Condens Matter 10:8105–8138. https://doi.org/10.1088/0953-8984/10/37/002CrossRef

201.

Müller M, Schmid F (n.d.) Incorporating fluctuations and dynamics in self-consistent field theories for polymer blends. In: Advanced computer simulation approaches for soft matter sciences II, pp 1–58. Springer-Verlag, Berlin. https://doi.org/10.1007/b136794

202.

Jiang Y, Li S, Chen JZY (2016) Perspective: parameters in a self-consistent field theory of multicomponent wormlike-copolymer melts. Eur Phys J E 39:91CrossRefPubMed

203.

Martin TB, Gartner TE, Jones RL, Snyder CR, Jayaraman A (2018) PyPRISM: a computational tool for liquid-state theory calculations of macromolecular materials. Macromolecules 51:2906–2922. https://doi.org/10.1021/acs.macromol.8b00011CrossRef

204.

Schweizer KS, Curro JG (n.d.) PRISM theory of the structure, thermodynamics, and phase transitions of polymer liquids and alloys. In: Atomistic modeling of physical properties, pp 319–377. Springer, Berlin. https://doi.org/10.1007/BFb0080203

205.

Jayaraman A, Nair N (2012) Integrating PRISM theory and Monte Carlo simulation to study polymer-functionalised particles and polymer nanocomposites. Mol Simul 38:751–761. https://doi.org/10.1080/08927022.2012.683528CrossRef

206.

Karger-Kocsis J, Bárány T (2014) Single-polymer composites (SPCs): status and future trends. Compos Sci Technol 92:77–94. https://doi.org/10.1016/j.compscitech.2013.12.006

207.

Lakshmi V, Karun AS, Rajan TPD (2022) Polymeric nanocomposites. In: Nanotechnology in the automotive industry. Elsevier, pp 37–63. https://doi.org/10.1016/B978-0-323-90524-4.00003-7

208.

Dhiman B, Guleria V, Sharma P (2020) Applications and future trends of carbon fiber reinforced polymer composites: a review. Int Res J Eng Technol 7:1883–1889

Titel: Polymer Composites: Synthesis, Application, and Basic Theoretical Aspects
verfasst von: Nishtha Arora
Sachin Dua
Smruti Vardhan Purohit
Bibek Dash
Manishkumar D. Yadav
Bikash Kumar Jena
T. Senthilkumar
Verlag: Springer Nature Singapore
Buch: Polymer Composites: From Computational to Experimental Aspects
Print ISBN: 978-981-9708-87-1

Electronic ISBN: 978-981-9708-88-8

Copyright-Jahr: 2024
DOI: https://doi.org/10.1007/978-981-97-0888-8_1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht